SP-Pony Q 51.2V100Ah 7.68KWh Wall-Mounted Home Energy Storage System 1

SP-Pony Q 51.2V100Ah 7.68KWh Wall-Mounted Home Energy Storage System 2

SP-Pony Q 51.2V100Ah 7.68KWh Wall-Mounted Home Energy Storage System 3

SP-Pony Q 51.2V100Ah 7.68KWh Wall-Mounted Home Energy Storage System 4

SP-Pony Q 51.2V100Ah 7.68KWh Wall-Mounted Home Energy Storage System

The SP- Pony Q 51.2V100Ah 7.68KWh wall-mounted home energy storage system is suitable for family use, it can be a backup power in the event of a blackout, and for every house and especially those located in remote areas where the cost of utility is too high or facing issues with unstable or limited power supply.

Size	L:580mmW:830mmH:247mm±1mm
Nominal capacity	150Ah/200Ah/300Ah
Nominal voltage	51.2V
Weight	96Kg±3Kg
Maximum charging voltage	58.4V (0℃≤T≤55℃)
Minimum discharge voltage	40V (0℃＜T≤60℃)
Minimum discharge voltage	32V (-20℃≤T≤0℃)
Input Charging Current	100A
Standard Output Discharging Current	100A
Rated power	5120W
Cycle Life	≥3500 (0.5C/0.5C,80%DOD@25℃)
Max.charge current	115A
Maximum continuous discharge current	140A
Maximum instantaneous discharge current(2S)	200A

Inquiry

Write a Review

Application

Features

● Adopt LCD touch screen + battery management system to control, easy to operate;

● Support mobile APP control and monitoring performance for Android & IOS system;

● Max 6 units in parallel, capacity can be up to 92.16KWh;

● Off-grid, On-grid and Grid-tie operation modes for you to choose;

● Can equip with the inverter, with solar input and built-in MPPT solar controller;

● Multiple communication systems for RS485, Modbus WIFI, 4G;

● With high IP class IP65, more safety to use.

Device Parameters

No.	Item	General Parameter		Remark
1	Battery link	16S3P		16S3P-150Ah
2	Rated Capacity	Typical	150Ah	Standard discharge after Standard charge（package)
		Minimum	147Ah
3	Type/model	CJSL-7.68KWH
4	Rated capacity	7.68kWh
5	Rated voltage	51.2V DC
6	Voltage at end of Discharge	Lowest voltage for single cell is 2.7V，or total voltage is 43.2V		Discharge Cut-off Voltage
7	Recommended charging voltage by manufacturer	57.6V or 3.60V/any cell		Volta-meter (Serial*3.60V), Battery pack safe charging voltage
8	Internal Impedance	≤30mΩ		Under 20±5℃ Environment Temperature , the Usage Frequency of Fully Charge( 1KHz) , Use AC Internal Impedance test machine to test
9	Standard charging current	100A		Charge at constant current 100A until voltage reaches 57.6V, then charge at constant voltage 57.6V till charge current is 10A
10	Max Charging Current(Icm)	115A		Ampere-meter, Maximum allowable continuous charging current of the battery pack
11	Upper limit charging voltage	58.4V or 3.65V/cell		Volta-meter (Serial*3.65V), Battery pack safe charging voltage
12	Standard discharging current	100A
13	Max continuous Discharging current	140A		Maximum continuous discharge current allowed by the battery pack
14	Discharge Cut-off voltage(Udo)	43.2V		Voltage of the battery when the discharge is stopped
15	Operation Temperature Range	Charge:0~55℃
		Discharge: -20~60℃
16	Single module Size	L:580mmH:830mmW:247mm		±3mm
17	APP	4G		optional
18	System weight	96Kg		Approx. 96kg(include bracket)

How To Use

GIF-1

GIF2

GIF3

Configuration List

NO.	name	Selection/Brand/Specification	Qty
1	the energy storage system	Pony-Q	1
2	DC output wire	1.5 meter	1
3	Inverter communication wire	2 meter	1
4	Parallel communication wire	1 meter	1
5	wall mount bracket	Domestic	1
6	mounting screws	1 set	1
7	Communication upgrade wire	1meter (Optional)	1
8	Inverter	Pony-Q(Optional)	1
9	Digital Version User Manual	Pony-Q	1